FlexPod Bracket Z Installation Guide

Table of contents

Table of contents

Overview

Procedure.

Overview

Thank you for purchasing the FlexPod Bracket Z from CravenSpeed.  The piece is made from the highest grade materials and is guaranteed to be free from defects.

The only tools required are a T25 Torx driver, and Philips Head Screwdriver.

        Parts included are:

        1 ea Bracket Z

            2 ea Plastite Screws

            2 ea Spacers

Please Follow All Directions Carefully.

Procedure.

1. Remove factory-mounting screws from  behind tach/speedometer unit. Press the  release button on the green wiring attachment to detach  it and lift the unit off the steering wheel.  Keep the factory screws!

2. Remove the two factory screws from the  back of the tachometer. Or remove the two from the back of the speedometer if you  have a dual gauge and want to mount you device on that side.

3. Place spacers into holes where the  screws were, and secure the mounting  bracket with the included screws. Do not  over tighten.

4. Place unit back onto steering wheel and  press the wiring attachment back into  position. Tighten the factory screws into the  bracket on top of the wheel.

If you have any questions about this installation, please give us a call at (503)505-6886 from Monday - Friday between 8am and 4:30pm Pacific Time and we will be glad to give you a hand.

We love pictures too! If you have some nice photos of our products that you would like to share with us you can email them to: support@cravenspeed.com