欧阳康
北京邮电大学，电子科学与技术
信息光子学与光通信国家重点实验室
+86 136 6139 2185
教育背景
北京邮电大学 2012/9~至今
工学硕士，信息光子学与光通信研究院，电子科学与技术
武汉纺织大学 2008/9~2012/6
工学学士，电子与电气工程学院，电子信息工程，gpa[3.66/4.0]，rank[1/156]
实习经历
长飞光纤光缆股份有限公司，光纤光缆制备技术国家重点实验室 2013/8~2014/4
0.2S全光纤电流互感器，项目负责人
以光纤为媒介，以电流(< 1200A)产生的磁场为源，利用法拉第磁旋光效应捕获电流
信息，通过模拟信号处理(放大、锁相、调制、解调、滤波)、数字信号处理（FIR滤波、
滑动平均滤波）等方法、温度补偿还原出电流的信息，精度达到IEC60044-8标准0.2S
级别。
系统方案论证；硬件选型与四层PCB设计；FPGA模块控制程序编写；
Matlab上位机程序编写；系统测试与技术文档编写
项目经历
航天器搭载光纤通信系统, 2014-Present
设计实现太空环境下10GBPS光纤通信系统平台
基于FPGA的高速发送模块、接收模块、校验模块程序编写
基于FPGA + STM32的网络导纳分析仪, 2012
测量一端口RC网络的电导与电纳
硬件电路设计与调试；编写Verilog直接数字频率合成程序产生任意频率的正弦波
基于FPGA + STM32的多功能计数器, 2011
测量正弦信号的频率、周期和相差（两路同频正弦信号）
硬件电路设计与调试；编写基于FPGA的Verilog等精度测频、测相程序。
基于51单片机的超声波测距仪, 2010
利用超声波方向性好的特点测量两点的距离
硬件电路设计与调试；编写基于MCS51的C测距、温度校正程序
C#串口上位机动态绘图, 2009
C#上位机开发，实现串口接收数据并实时动态绘图
个人技能
Multisim | Quartus | Shell | Source Insight | Vim
获奖情况
武汉纺织大学优秀毕业生
校一等奖学金(1/32)
校一等奖学金(1/32)
校电子设计大赛二等奖
Kang Ouyang
Beijing University of Posts and Telecommunications
State Key Laboratory of IPOC, Electronic Science and Technology
(86) 136 6139 2185
M.S., Electronic Science and Technology, expected 04/2015
B.S., Electronic and Information Engineering, Overall gpa 3.66/4.0, Rank 1/156
Yangtze Optical Fiber and Cable Co.Ltd.,State Key Laboratory, 8/2013-4/2014
0.2S Level All Fiber Optical Current Transformer, Project Leader
With optical fiber as medium, magnetic field producing by current (< 1200A) as
source, we employ Faraday magnetic rotation effect to capture the original current
information through analog signal processing, digital signal processing
and temperature compensation, expected to meet 0.2S level according to
IEC60044-8.
Spacecraft Optical Fiber Communication System, 2014-Present
Designed and implemented 10Gbps optical fiber communication system under space circumstance.
My responsibilities: programmed modules about translating, receiving and verifying in Verilog.
Network Admittance Analyzer Based on FPGA + STM32, 2012
Measured one port RC network on the conductance and the susceptance.
My responsibilities: designed and debugged the circuit; programmed modules about direct digital synthesis in Verilog to generate a sinewave in any frequency.
Multi-functional Counter Based on FPGA + STM32, 2011
Measured the frequency, period and phase difference of tested sinewave.
My responsibilities: designed and debugged the circuit; programmed modules about equal precision frequency measurement to measure the frequency.
Ultrasonic Range Finder Based on MCS-51, 2010
Measured the distance between two points exploying the good direction of ultrasonic.
My responsibilities: designed and debugged the circuit; programmed modules about the distance measurement and the temperature calibration in Verilog.
UART Upper Machine to realtime dynamic display in C#, 2009
Designed a upper machine to receive datas through UART and plot in realtime in C#.