Yamaha R Max 1000
Installation Instructions
You must run an aftermarket fuel controller with this exhaust. Running without could result in engine damage.
Installation Hardware
- 2) 8mm X 80 mm Flange Bolts
- 2) 8mm X 24 washer (For Muffler Mount Plate)
- 2) 8mm Stainless Washers (For Muffler Mount Plate)
- 2) 8mm X 35mm Flange bolt (For Muffler Mount Plate)
- 2) 8mm Nyloc nuts (For Muffler Mount Plate)
- 2) Springs
- 2) M6 X 30 Alan Bolts (For Logo Plate)
- 2) ½ in Aluminum Spacers (For Logo Plate
- 6) M6x 12 Alan Bolts (For Logo Plate)
- 8) M6 Flange Nuts (For Logo Plate)
- Remove stock Exhaust and Heat shield
- Install the y pipe into the mufflers. Tap them in with a rubber mallet to make sure they are all the way in.
- Install the 2 supplied springs
- This next step will probably take an extra set of hands
- Line up the flange to the stock head pipe while lining up the exhaust mounting plate with the corresponding holes on the frame
- Using the supplied bolts and washers, fasten the mounting plate to the frame.
- Using the supplied bolts and washers and OEM exhaust tension springs secure the slip on pipe to the stock head pipe
- Install the Empire Name plate to the Exhaust backing plate with the supplied hardware
- Double check all of your clearances before riding
We recommend repacking the mufflers every 50 hours of use.
Packing Part # EMP-PAC-18
Quiet Cores available Part # EMP-QCT-R
DISCLAIMER: All products manufactured and/or distributed by Empire industries Inc. are a) intended for use on stock vehicles specific to the U.S. market; b) for closed course use only unless otherwise stated and c) not intended to meet emission regulations for use on public lands, roads or access routes – consult with local jurisdictions. Empire industries Inc. makes no claims as to the products applicability, effectiveness or fitment on modified machines. Empire industries Inc. is the sole determines of abuse, misuse, installation errors and modifications. We assume no liability for any errors in listings, specifications, part numbers, prices or model applications. We reserve the right to change specifications, product descriptions, product quality, pricing and application at any time without notice and without further obligation. Buyer assumes all risk for any and all damage caused to themselves, a third party and/or property by virtue of failure of these products. By installing and/or using an Empire industries Inc. product, you hereby accept and understand these stated terms and conditions and have followed all instructional steps.
EMPIRE INDUSTRIES WARRANTY
All our exhaust systems come with a warranty against material defects and or workmanship for a period of 90 days. Any exhaust that is damaged by improper installation, modification, incorrect jetting, fuel mapping, misuse, abuse, or a crash will not be covered under warranty. Empire Industries can repair exhausts that are not covered under warranty at the customer’s expense.
Empire Industries recommends repacking the silencer every 15 to 20 hours. Failure to replace silencer packing can cause serious damage to the silencer. Any exhaust that is deemed by Empire Industries to be lacking in packing material is considered misuse, and abuse, thus voiding the warranty.
Any damage that occurs to the exhaust during shipping must be reported within 72 hours of receipt. Empire Industries is not responsible for any damage during the shipping process. Upon being notified of shipping damage a claim will be filed with the shipping company.
If there is a fitment issue with the exhaust, please call us immediately. Any Exhaust that has been fit on the vehicle and fired up or modified in any way will not be covered under warranty.
Empire Industries recommends that all exhaust systems be installed by a professional mechanic.
Customers must produce the original receipt to qualify for warranty repairs.
Shipping/Returns
If you should need to return your exhaust for any reason, please follow the following procedures.
1. Call Empire Industries at 623 439 5038 for a Return Merchandise Authorization (RMA)
2. Send all warranty items to:
Empire Industries
Please ship all UPS packages to:
Empire Industries
39613 N 3rd St
Phoenix, AZ 85086
Please ship all USPS MAIL and Priority packages to
Empire Industries
515 E Carefree Hwy PMB 1192
Phoenix AZ 85085-8839
Thank you
Empire Industries Exhaust INC
3. All Costs associated with shipping are the responsibility of the customer. Empire Industries will not incur any shipping-related costs for non-warranty items. Items that are deemed to be covered under warranty will be returned free of charge Fed EX ground ONLY. Faster shipping is available at the customer’s expense.