T3P3 Kossel Mini Kit Release 3
Appendix B Printed Parts list
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Note: Printed parts designs are on our Github repository at https://github.com/T3P3/kossel - the original designs are in the main folder and our additional and modified designs are in the Release 3 folder.
Full set of printed parts for Mini Kossel kit, including extra parts designed by T3P3 and their customers. Parts are supplied in customer’s choice of colours, except for the hot end mount and fan duct which are always black.
Motor brackets x 3
Top brackets x 3
V-roller adapters x 3
Carriages x 3
End effector plate (for V6 hot-end)
Hotend PCB mount
PP08 - up to 25 May 2016
V6/fan/IR mount - always black
PP08 - Revised 26 May 2016
V6/fan/IR mount - always black. Brass inserts added
PP09 - up to 25 May 2016
Fan duct - always black
PP09 - Revised 26 May 2016
Fan duct - always black. Brass inserts added
Endstop mounts x 3
PP11A For kits to 14 April 2016
Elmuchacho’s mini extruder bracket - may be printed in black.
PP11B For kits from 15 April 2016
A revised extruder bracket with push-fit Bowden tube connector is pre-fitted to the extruder
Duet rear mount brackets
Duet power plate
Duet face plate
Printed parts for top-mounted filament spool mount: Base x 1, Brackets x 3, Turntable x 1, printed washer x 1.
Adapted from Kossel spool top mount by elmuchacho, http://www.thingiverse.com/thing:371881
Filament tube stop mount
Boxed set of parts as supplied in kits