Service Manual

(LS40, LS50)

LG Electronics

Removing and replacing a part (FRU)

1010 Battery Pack

1. Push the battery latch in the direction shown below; then slide the battery pack out of the slot.

2

Removing and replacing a part (FRU)

1020 Hard Disk Drive

Remove the battery pack (1010) before replacing this part

1. Remove a screw as indicated in the picture, then pull the HDD Assy out in the direction shown below.

1

No.

FRU No. Specification EA 1 1SZZBA4085A M3.0 X L6.0 1

3

Removing and replacing a part (FRU)

1030 Keyboard

Remove the battery pack (1010) before replacing this part

1. Remove 2 screws.

1

1

Lembre-se sempre de soltar os parafusos indicados, antes de tentar liberar o teclado.

EA Specification FRU No. No.

2 M2.0 X L8.0 1SZZBA4083A 1

4

Removing and replacing a part (FRU)

2. To remove three hooks, insert a (-) type screwdriver into a hook located at the lower end of keyboard, and pull it up.

Não aplique força excessiva, uma leve pressão nas travas para trás, será o suficiente para liberar o teclado

5

3. Disconnect the keyboard connector.

Removing and replacing a part (FRU)

6

1

Removing and replacing a part (FRU)

1040 Retainer

Remove the following parts in order before replacing this part

Battery Pack (1010) Keyboard (1030)

1. Pull up the retainer, and remover the connector using a (-) type screwdriver.

Evite o uso de chaves metálicas nesta parte, por marcar facilmente use ferramenta plástica ou somente as mãos.

7

Removing and replacing a part (FRU)

1050 Fan Assembly

Remove the following parts in order before replacing this part

Battery Pack (1010) Keyboard (1030) Retainer (1040)

1. After removing a screw and the connector, pull up and remove the fan Assy using a (-) type screwdriver.

1

1

1

No.

FRU No. Specification EA 1 1SZZBZ4020A M2.0 X L8.8 3

8

Removing and replacing a part (FRU)

1050 Fan Assembly

Remove the following parts in order before replacing this part

Battery Pack (1010) Keyboard (1030) Retainer (1040)

1. After removing a screw and the connector, pull up and remove the fan Assy using a (-) type screwdriver.

No.

FRU No. Screw Qty 1

1SZZBZ4020A M2.0 X L8.8 3

9

Removing and replacing a part (FRU)

1060-1 Optical Disk Drive (14.1” Model)

Remove the following parts in order before replacing this part

Battery Pack (1010) Keyboard (1030) Retainer (1040)

1. Remove a screw, insert a screwdriver into the back side of ODD and push it out.

No.

FRU No. Screw Qty 1

1SZZBZ4014A M2.0 X L5.0 1

10

1