www.rajdowe-haldy.pl  www.rallycomputer.com www.sparkelectronics.pl www.taksometry.pl 

SHOP ➨: www.sklep.sparkelectronics.pl 

 

Rallycomputer multifunction

AZIMUTH+tripmeter

Setup Manual.

Instruction Manual.

* Content marked [GPS] only for versions with built-in GPS or an external device connected Garmin. Working with an external GPS module, such as the Garmin does not provide such precision as the built-in GPS.


Rallycomputer multifunction

AZIMUTH+tripmeter

Setup Manual.

Device Description

Purpose

functions

device configuration

Setting the device

Use


Device Description

Purpose

The combination of the two functions in one device is To quickly navigate to off-road rallies and to reduce the number of devices and cables connecting them in a car, motorcycle or ATV.

functions

Setup and Operating

Detailed instructions handles configuring devices: computer Rally and Rally tripmeter multifunction multifunction computer includes Azymuth at:

http://rallycomputer.com/support/instruction.html

Below are the information for only the portion corresponding to the operation of the device containing the two functions.

device configuration

inputto configuration menu items is possible with the Startup screen long press MANAGE.

most important rules of navigating the menu are listed below:

remaining principles of the buttons are described for each of the sub-menu.

enabled value of each function is contained in square brackets.

Setting the device

DSC_0051.JPG

to the simultaneous operation of two functions:

  1.  select the Device Settings
  2. using the arrow keys, go to the command RUN
  3. OK button, select the type of work: Azimuth rel . +
  4. Tripmeter,press CLR to exit the
  5. submenu,press CLR long to exit the menu which will save your settings

by setting the other parameters refer to the user equipment tripmeter and Azymuth.

Use

combination of function causes the device always starts as a tripmeter. To start press the RUN position with the startup screen.

Tripmeter see a screen (for images that already has value and TRIP ODO).

DSC_00501.JPG 

At the bottom of the screen, there's a pointer positioning of the vehicle on the first point routing waypoint file that you set as active. File name is displayed on the bottom of the screen on the right. Once you are on the first point routing, press RUN and the unit switches to Azymuth.

DSC_0052.JPG

On the screen you will see a list of points. The center point is this referring to the August rate of vehicle settings on the previous screen. Press OK and perform routing. If you have connected your Garmin waypoint will be traced there as well.

DSC_0053.JPG

This is the screen after wytrasowaniu. At the bottom appeared ODO value or which shall be charged all the time.

Upon reaching the waypoint, press OK to return to the azimuth of the filethe

DSC_0052.JPG

usingarrow keys to select the azimuth which will trasował the next

DSC_00499.JPG

and then press RUN to go to the odometer

DSC_00509.JPG

has been reset TRIP Indication , ODO contains a total way that you can delete, correct, or leave.

indicator of vehicle settings is active for the grid 071, which will be routed next.

SPARKELECTRONICS Robert Skierski,

Office: 01-424 Warsaw, Al. Primate of the Millennium 78a, tel / fax: 022 836-24-51 

www.rajdowe-haldy.pl