Shoei RF-1400 Helmet Review S3

Shoei RF-1400 Helmet Review

If you're presently riding in a much less brand-new helmet, maybe you're riding in something that was your very first helmet. You intend to update to something a bit more superior, I assume the Shoei RF-1400 is still going to be a remarkable option.

So how does Shoei set about transforming and also updating such a revolutionary helmet? Extremely very carefully, and that's what you're going to see with the RF-1400.

We're mosting likely to carry out in this post break down all the updates as well as modifications that you're going to see in between both, and we're mosting likely to give you our ideas on how that correlates to the helmet's efficiency.

The cost will come in around $499, so we might as well round up to that $500 mark. However we do not see a huge price boost in solid shades. The outgoing headgears around $485, so truly, the price isn't enhancing too much, approximately about ₤ 15.

Shoei RF-1400 Shell Construction

If you're currently riding in a much less brand-new helmet, perhaps you're riding in something that was your initial helmet. You wish to upgrade to something a little bit much more premium. I believe the Shoei RF-1400 is still going to be a fantastic choice.

How does Shoei go concerning altering and also upgrading such an innovative helmet? Very meticulously, which's what you're visiting with the RF-1400.

We're mosting likely to carry out in this short article break down all the updates as well as adjustments that you're visiting in between both, and we're going to give you our thoughts on exactly how that correlates to the helmet's efficiency.

The rate will certainly be available in around $499, so we might also assemble to that $500 mark. We do not see a substantial price increase in solid colors. The outward bound safety helmets around $485, so truly, the price isn't increasing excessive, roughly regarding ₤ 15.

Shoei RF-1400 Shell Construction

The shell construction itself has stayed the exact same. It's that AIM's plus shell, which is the advanced integrated matrix plus covering from Shoei.

That's their material that they proprietarily hold the knowledge on. Yet it is the same construction that we saw with the RF-1400 or the RF-1200, so no actual adjustments there.

Shoei RF-1400 Shell Sizes

There are four various shell sizes. The benefit with having many various shell sizes is that smaller sized headgears look smaller sized and fit smaller sized if you are a smaller individual, and also bigger helmets then scale up in size. it likewise aids to reduce weight on the lower end of the range, so you're not using an extra-large covering on a small helmet,

the shell dimension malfunction ranges from additional little, tiny for the first one, then an independent covering for medium, independent shell for large, and then extra-large 2XL obtains its very own covering dimension.

Shoei RF-1400 Safety Rating

It is now snell 2020, so snell 2020 score on this.

Shoei RF-1400 Weight

It can be found in at 3lbs 9 oz in a medium. Currently, if you go to RF-1200 motorcyclist, you're familiar with the outbound helmet. It is a three-ounce boost. So we asked Shoei where did the included weight originated from?

Their answer was they have actually reinforced the EPS liner on the side of the go to far better effect protection, and also what you'll discover as we function our method through this is the cheeks are mosting likely to feel a little bit snugger.

Part of that is the shape to the cheek pad, however likewise part of that is the reality that they have increased the side protection on this specific helmet. How that converts to the helmet, we will certainly get to that in one secondly.

Shoei RF-1400 Fit

For those not familiar with the outward bound RF-1200, the fit stays the very same: intermediate oblong, a bit much longer front to back, narrower down the side of the head.

What we enjoyed concerning the RF-1400 is that it fits concerning 80 percent of the population. People would certainly contact the CS, and they would state I need a terrific well-rounded helmet, as well as I need it to fit right out of the box.

99% of the moment, they're going to get a recommendation to at least have a look at the RF-1200, as well as 80% of the moment, it will work. It will help most of the motorcyclists out there in the American market, which is among the factors it's come to be so preferred.

Shoei did change the fit a bit as it kicks back the cheek pads. It is a little snugger to obtain the helmet on and off. When you have the helmet on, it's going to sit snug against your cheeks. It makes it more comfortable when you're riding. You do not feel like the helmet's flexing around you as much.

It would be best if the helmet to fit great and also tight on your cheeks. We always utilized to say it resembles when your aunty comes to community, and she pinches your cheeks. It does end up being essential when we speak about the fit adjustments to this specific cover.

Shoei RF-1400 Aerodynamics

Shoei has made the helmet much more wind resistant, according to their claims. They minimized drag by 4 percent, and also they lowered lift by 6 percent although it's got a three-ounce weight modification.

It feels a little bit lighter, you can ride throughout the day, and it does not really feel larger out on the road. The instance I'll provide you is that the Shoei VFX Evo, on the dirt side of things, is virtually four extra pounds, and also out of all the dust safety helmets I have actually utilized, that's my favored go-to.

Shoei does do a great work of making the helmets. Although you toss them on a range, they look hefty on paper; they do convert to a little a lighter feel when they're out in the roadway.

A lot of that once again is mosting likely to pertain to the wind resistant modification. Simply taking a look at this from a profile side factor, the back spoiler has actually lost weight somewhat; it is a little bit extra wind resistant.

Shoei RF-1400 Exterior Vents

The huge adjustment you will certainly observe as we discuss the vents is that the front vent has changed. You no longer have this little area right below, which kind of creates friction with the wind circulation over the top.

They have actually gone to more of this slider design, something really comparable to what we've seen on the GT-A R 2 or the Neotec 2, which makes it a lot simpler to make use of.

Shoei RF-1400 Airflow

Among the reviews of the RF-1200 was the airflow. Not just was the airflow not good, but once you open up both vent sliders on the front, it was a pain in the butt to slide it backward and forward, specifically with motorbike handwear covers on while you're riding.

They have actually simplified the layout of the new helmet. It is really similar to what you would certainly see on the GT-Air 2 or the Neotec 2. It's very easy to feel if the vents are open or shut, particularly if you are using have gloves.

The various other thing that they have actually done is they've increased the vents. They have actually gone to two openings on the top; this assists to press airflow via the front end.

They have actually increased the exhaust vent by almost 50 percent so that air that's pressing through from the front has a much simpler means of running away currently.

The one point to note below is that the vent made use of to be an energetic air vent, which indicates you could shut that off in colder weather.

Once more, part of the issue was that of their major grievances was that it was truly tough to determine whether the vent was open or shut.

Especially if you were riding along and you got to around to feel that there had not been a modern means of saying, fine, that is clicked open or it's click closed.

With this new one, it is a passive van, which indicates it's open all the time. It's not something that's a big problem for me because, even if you're riding in chillier climate, you can close the front vents, which's where the air is pushing in.

Something to keep in mind that this vent on the back is now passive, yet it is a great deal larger, which will certainly assist for riding in the summer months.

Having a look at the front, you're mosting likely to discover that the front air vent modification is twofold.

The air vent design has actually altered somewhat, and you press it to open it up. One thing to note right here is that the face shield opening has actually moved to a button style on the front.

I've critiqued this on a few other helmets that we have actually made use of. Several of the various other safety helmets have a much better design. If you're considering something like the AGV K6, it's more of a clear push, click pop open.

With this, it's a bit more difficult to get it open. It's not a press; you need to push in, it doesn't appear, you need to push in and then press the visor up.

It just makes it made complex a little bit when you're attempting to either open the vent in the front or press it open. The old one had a clear design on the side where you pushed the latch-up, as well as it opened up.

As far as the detents are worried, there behave strong detents with this. When you open it to the full setting, it does lock into that wide-open placement.

Shoei RF-1400 Face Shield

The face shield tale is an additional among the significant adjustments they have actually enhanced the facial a fair bit. It's now a CWRF2 face shield. They have actually taken a great deal of the modern technology from their 14 lines that Marc Marquez has been making use of, and also what you're going to see below are the little vortex generators over on the face shield. Again to aid ruin the air, that adds with the aerodynamics.

Shoei RF-1400 Pinlock

The various other thing you'll note is the pinlock insert is now a lot larger, concerning a 10% increase on the pin lock insert. If you're not acquainted, a pin lock is a little liner that rests on the within the face shield.

It comes standard in the box on this particular helmet, as well as when you insert it, it assists in chillier temperature levels or simply general fogging. If you breathe heavily, and your helmet is all secured up in a cold morning, you don't need to stress over the fogging on the within the face shield.

They have also improved the line of vision. So when you're making use of the facial, it's much easier to see out with no distortion in your peripheral-- and it is a substantial improvement over the previous version.

The various other thing you'll also see is that while the layout for obtaining the visor on and off coincides, you have the little lever that takes down, and also it pops off. You'll observe the little switch. This was on the previous variation, yet it was actually like a screw head that you needed to turn.

You can change it, as well as it pulls the face shield in snugger to the gasket. That makes it adjustable with a great fitment for just how that will help the gasket on your helmet.

The gasket on the previous version was a one-piece gasket. It has boosted a little bit, the ceiling up around the face shield; there are no spaces. We like to take a little post-it note and also try to run it in there to see any kind of voids in addition to the gasket; we couldn't locate any kind of.

We such as the redesign of the face shield on this helmet, with the exception of that facility release. That's not mosting likely to be favorable for a lot of individuals, particularly if you're trying to do that with motorbike handwear covers on. Once more, a minor nitpick for all the positives that we did see with the face shield redesign.

When you check out the side of this helmet, among things you're mosting likely to discover is the extra padding has actually been redesigned.

The EPS has a little bit a lot more EPS. From a protection standpoint, Shoei tells you that this is a bit of added advantage for the head's side. The downside was when we set up a com system; it pressed the gasket.

It placed a bit of pressure on the gizmo, as well as you're probably going to feel that pressing versus the left cheek pad a little. So keep that in mind.

Among our nitpicks is you're going to have to utilize a sticky mount. Shoei will have a little adapter mount that you can mount your com system to, but if you're attempting to utilize your clamp system regularly, you can get it therein. It's simply not going to be the best remedy feasible.

Shoei RF-1400 Noise Reduction

Let's toss this visible. I think noise reduction is extremely certain to specific motorcyclists. Among the largest inquiries we get is, is the helmet more quiet? Is this helmet any type of noisier? It's subjective.

Helmet noise doesn't bother me whatsoever. I can go out on the freeway, I'm typically using earplugs, so I can not state you know for sure that you're going to find this certain helmet quieter.

I can inform you that with us riding in it, the RF-1400 is no quieter than the RF-1200. I'm not going to claim it's noisier, yet it's not quieter.

The something to note right here is to make best use of the helmet to be as quiet as you desire, is that it is designed to be utilized with the chin skirt. Okay, I'm not also keen on a chin skirt.

It makes it a bit harder to enter as well as out of the helmet,|I remove it. It is removable, however, for those of you available trying to minimize as much sound as feasible, you're going to intend to use the helmet with the chin skirt mounted.

Shoei RF-1400 Cheek Padding

The other thing you'll note is the layout under has changed; you have a snugger fit. The shape of the cheek pad has more cushioning. It offers it a better seal around the bottom of the helmet, offering you much less airflow pushing up from the bottom.

What that indicates for you when you're taking the helmet on is you're going to have to pull it apart a little bit harder keeping that chin band to be able to participate and also off. Once you have it on, you will observe that the cheek pads are a little snugger than the previous version of the RF-1200.

When you have the helmet on, it's a much more comfy helmet. There's a much better shape to the cheek pad; you have less airflow pushing up from below, so it is a somewhat snugger fit, yet it's going to be far better.

When you're rolling down the freeway, it's, going to assist to hold the helmet in place simply that better. There's no change to the interior crown, which's where you obtain the sizing.

Shoei RF-1400 Quick Release System

You still get the quick emergency cheek pad system, so if you require to pull it out, you can get in an emergency situation in a collision. The emergency medical technician's can obtain that out right now.

Shoei RF-1400 Interior Venting

When you have removed the headliner, you will see the improved interior venting system. While it does not resemble there are cutouts or channels for airflow, which is something I would require in a helmet, they lag the first layer of EPS.

The airing vent runs through a surprise layer pushing the airflow via openings cut into the EPS lining. The air after that mosts likely to that bigger exhaust vent at the rear of the helmet. Once more, tiny refinements we see across the board do assist make the helmet a little bit extra ventilated.

Shoei RF-1400 Comm System Integration

When the RF-1200 was presented, they was just one of the initial safety helmets to standardize detachable skins for comms systems. There is a great deal of stuff incorporated right into helmets nowadays, speaker cutouts, pinlock that are currently included in the box. That really did not exist 8 or nine years ago.

When Shoei brought this to the table, they were leading the charge with many of these advancements, and also it continued in this helmet.

In Conclusion

I would certainly claim that this is not the very same revolutionary helmet that we saw with the RF-1200. It really did not damage the mold and mildew, yet I didn't have to. The RF-1200 is still, to now, among the best marketing headgears on the market, as well as they really did not want to estrange those individuals.

What they did was they took the RF-1200, and they resolved several of the concerns that cyclists have actually had with it. A fair review would be the button at the front of the face shield, the fact that it did obtain somewhat much heavier.

You recognize-- as well as I understand that Shoei declared, that you understand part of that weight was adding to the EPS. I would certainly have thought that they would certainly keep the weight at least the same or perhaps decrease it a bit.

However after that you can consider several of the pros. The aerodynamics have boosted. The helmet really feels a lot more secure while you're riding. Those cheek pads do make it much more comfortable to ride in.

The airing vent is greatly improved. In this group, the airing vent on this one is currently among the most effective.

If you are an RF-1200 individual and your helmet is getting a little bit aging, you wish to upgrade. I think you're going to be really comfortable in an RF-1400. It's mosting likely to feel like house, yet possibly a slightly nicer residence.

There's a great deal of bikers around using RF-1200s and also RF-1400s. I would urge you to review other biker testimonials from individuals around placing this helmet through its paces.