Duet Electronic Controller

Documentation © Think3DPrint3D Ltd 2016

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

http://www.think3dprint3d.com/

  < Back      

7 Further reading

Think3DPrint3D Duet and Duex4 Blog entries

20131202: http://blog.think3dprint3d.com/2013/12/Duet-Arduino-Due-compatible-3DPrinter-controller.html

20140331:

http://blog.think3dprint3d.com/2014/03/Setting-up-Eclipse-for-Arduino-Due-and-Duet.html

20140414:

http://blog.think3dprint3d.com/2014/04/using-duet-with-wifi-router.html

20150208:

http://blog.think3dprint3d.com/2015/02/reprapfirmware-config-files.html

20150412:

http://blog.think3dprint3d.com/2015/04/duex4-v02a-minor-updates.html

20150807:

http://blog.think3dprint3d.com/2015/08/new-duet-electronics-version-085.html

RepRap Wiki Entries

Duet: 

• http://reprap.org/wiki/Duet

RepRapFirmware:

• http://reprap.org/wiki/RepRap_Firmware
• http://reprap.org/wiki/RepRap_Firmware_G-Codes
• http://reprap.org/wiki/RepRap_Firmware_macros

Configuring RepRapFirmware:

• http://reprap.org/wiki/Configuring_RepRapFirmware_for_a_Cartesian_printer
• http://reprap.org/wiki/Configuring_and_calibrating_a_delta_printer_using_the_dc42_fork_of_RepRapFirmware
• http://reprap.org/wiki/Configuring_RepRapFirmware_for_a_CoreXY_printer

Thermocouple and PT100 Support

• http://reprap.org/wiki/Using_thermocouples_with_the_Duet_and_RepRapFirmware
• http://reprap.org/wiki/Using_PT100_temperature_sensors_with_the_Duet_and_RepRapFirmware

Duet Web Control (DWC) interface

• http://reprap.org/wiki/Duet_Web_Control

Github Repositories

• RepRapPro's github repository (use the 'master' branch)
• David Crocker's fork github repository (use the 'dev' branch)
• Christian Hammacher's fork github repository (use the 'dev' branch)

DC42 Blogs

20150104

https://miscsolutions.wordpress.com/2015/01/04/upgrading-the-mini-kossel-to-duet-electronics-part-1-hardware/

20150105

https://miscsolutions.wordpress.com/2015/01/05/upgrading-the-mini-kossel-to-duet-electronics-part-2-software-and-commissioning/

20150122

https://miscsolutions.wordpress.com/2015/01/22/upgrading-the-mini-kossel-to-duet-electronics-part-3-calibration/

20150205

https://miscsolutions.wordpress.com/2015/02/05/upgrading-the-mini-kossel-to-duet-electronics-part-4-the-z-probe/

RepRapPro’s Documentation

https://reprappro.com/documentation/

  < Back