⚡Flash ALOHA: Learning Fast and Precise Manipulation
John Hua Yao Qi Wu Yihuai Gao Chelsea Finn Zipeng Fu
Stanford University
Tutorial Credits: Mobile Aloha
Part | Quantity | Link | Price (per unit) |
Robots | |||
Bimanual Lightweight 6DOF Arms | 2 | Options (as seen in Flash ALOHA): | $1652.98 (Seeed Studio DM arms) |
Camera setup | |||
Arducam USB Camera | 3 | https://a.co/d/0d7FquGT (Out of stock) Alternative: (Logitech C922, needs different holder CAD) | $59.00 |
Misc | |||
Velcro Straps | 1 | $9.99 | |
C-Clamps | 2 | $21.99 | |
Gripping Tape | 1 | $60.06 | |
USB Footpedal | 1 | $39.99 | |
Common equipment | |||
PLA Filament | |||
3D Printer | |||
Allen keys | |||
Screws (M3x20, M2x20) | (8, 6) | ||
Total | $3636.98 | ||
Leads (right) (1) | Leads (left) (1) |
Wrist Camera Holder (2) | Overhead Camera Mount (1) |
ALOHA Fingers (2) From ALOHA 2 | Finger Adapters (2) |
Links:
0. Print the leads with high infill.
It’s important to print the leads with relatively high infill for strength. We usually go with 50%.
1. Complete the leads
Thread the velcro through the printed leads: (Note! Best to use the soft side on the inside)
Loose Long Lead | Loose Short Lead |
Use one strap for the small lead, and two for the larger lead.
Secured Long Lead | Secured Short Lead |
Tighten the straps, making sure to maximize velcro adhesion. Snip the loose ends.
2. Attach the finger base and the leads, together to the sliders.
Use 4 M3x20 screws to secure the leads and the finger base to the slides.
Attached Finger Base Front View | Attached Finger Base Side View |
Note: The default gripper pinion that seeed studio arms ship with have too small of a radius to easily backdrive. Pictured is a custom printed larger pinion.
ARX L5, X5, and Hessian arms do not have this problem. Friction compensation (described in the code tutorial) can partially make up for stiff joints.
3. Attach the ALOHA fingers.
Use 3 M2x20 screws to secure each finger. Make sure to add the adhesive tape mentioned in the original ALOHA work: https://a.co/d/055wzWOc
Complete View |
Tip during operation: the fingers do not have to be inserted all the way into the straps, as it may restrict opening width.
4. Plug your arms, and the footpedals into power and your machine. Clamp the arms and camera mount to the table with C-clamps.
Suggested setup. Pictured are ARX L5 arms. |
5. Tune the PD controllers for your arms.
Depending on the arm, you may have more or less motor friction and resistance to backdriving during data collection. To optimize the experience, the first step is to tune the gravity and friction compensation parameters after setup.
Follow the guide in the github repo!
Supported in code (DM Motor stack) | Viable arms (lightweight) |
ARX L5, ARX X5, Seeed Studio DM version, YAM. | Hessian, Seeed studio RS. |
This list is not exhaustive! Most arms on the market today use the same DM motor configuration, which is supported by arx5-sdk. Code changes have been made in our repo, but eventually will be PR’d to the main repo.
You are now ready to use ⚡Flash ALOHA!