Published using Google Docs
Profile of Dr. N. Senthilkumar M.E., Ph.D., M.I.S.T.E.,.doc
Updated automatically every 5 minutes

Good 1.jpg

Name

:

Dr. N. Senthilkumar

Designation

:

Professor

Qualification

:

M.E., Ph.D., M.I.S.T.E

Email ID

:

nsk@adhiparasakthi.in

Degree

College

University

B.E

Government Engineering College, Salem (I Class)

Madras University

M.E

Madras Institute of Technology, Chromepet, Chennai

(I Class with Distinction – Gold Medalist)

Anna University

Ph.D.

Anna University, Chennai

Anna University

Specialization

:

Composite Materials, Metal Cutting, Optimization Techniques, Fuzzy Logic, ANN

Anna University Recognition No.

:

2620039

No. of Ph.D. Scholars Guiding

:

11

Editorial Board Member

:

2 International Journals

Journal Reviewer

:

10 International Journals

ResearchGate

:

Researchgate

Google Scholar

:

Google Scholar

INTERNATIONAL JOURNALS

  1. G. Paramaguru, M. Kannan, N. Senthilkumar, P. Lawrence, Effect of temperature on biogas production from food waste through anaerobic digestion, Desalination and Water Treatment, Vol. 85, pp. 68-72, 2017. Doi: 10.5004/dwt.2017.21189
  2. N. Senthilkumar, B. Deepanraj, K. Vasantharaj, V. Sivasubramanian, Optimization and performance analysis of process parameters during anaerobic digestion of food waste using hybrid GRA-PCA technique, Journal of Renewable Sustainable Energy 8, 063107 (2016); doi: 10.1063/1.4972884
  3. V. Selvakumar, S. Muruganandam, T. Tamizharasan, N. Senthilkumar, Machinability evaluation of Al–4%Cu–7.5%SiC metal matrix composite by Taguchi–Grey relational analysis and NSGA-II, Sadhana, Vol. 41, No. 10, pp. 1219-1234, 2016. DOI: 10.1007/s12046-016-0546-z
  4. N. Senthilkumar, V. Selvakumar, T. Tamizharasan, Optimization and Performance Analysis of Uncoated and Coated Carbide Inserts during Hard Turning AISI D2 Steel Using Hybrid GRA-PCA Technique, Applied Mechanics and Materials, Vol. 852, pp 151-159, 2016.
  5. A. Bhojan, N. Senthilkumar, B. Deepanraj, Parametric Influence of Friction Stir Welding on Cast Al6061/20%SiC/2%MoS2 MMC Mechanical Properties, Applied Mechanics and Materials, Vol. 852, pp 297-303, 2016.
  6. V. Selvakumar, S. Muruganandam, N. Senthilkumar, Evaluation of Mechanical and Tribological Behavior of Al–4 %Cu–x %SiC Composites Prepared Through Powder Metallurgy Technique, Transactions of the Indian Institute of Metals, DOI: 10.1007/s12666-016-0923-7.
  7. S. Santhanakrishnan, N. Senthilkumar, P. Lawrence, Evaluation of neat Cashew Nut Shell oil performance in Diesel Engine, Journal of Advanced Engineering Research, Volume 3, Issue 1, 2016, pp.21-25.
  8. B. Deepanraj, G. Sankaranarayanan, N. Senthilkumar, M. Pugazhvadivu, Influence of dimethoxymethane addition on performance, emission and combustion characteristics of the diesel engine, International Journal of Ambient Energy, DOI:10.1080/01430750.2016.1181568.
  9. N. Senthilkumar, J. Sudha, V. Muthukumar, A grey-fuzzy approach for optimizing machining parameters and the approach angle in turning AISI 1045 steel, Advances in Production Engineering & Management, Vol. 10, No. 4, pp. 195-208, 2015. DOI: 10.14743/apem2015.4.202
  10. D. Raguraman, D.Muruganandam, N. Senthilkumar, L.A.Kumaraswami dhas, Tensile Strength Prediction on Different FSW Tools Using ANN And Regression Equations, International Journal of Applied Engineering Research, Vol. 10, No.49, pp. 545-551, 2015.
  11. N. Senthilkumar, S. Sakthi Raadha, S. Udayavani, Synthesis and Characterization of Silver Nanoparticles by Chemical Route Method, International Journal of Production Engineering, Vol. 1, No. 1, pp. 25-34, 2015.
  12. N. Senthilkumar, T. Tamizharasan, Flank Wear And Surface Roughness prediction in Hard Turning via Artificial Neural Network and Multiple Regressions, Australian Journal of Mechanical Engineering. Vol. 13, No. 1, pp. 31-45, 2015. DOI:10.7158/M13-045.2015.13.1
  13. V. Muthukumar, A. Suresh Babu, R. Venkatasamy, N. Senthilkumar, An Accelerated Particle Swarm Optimization Algorithm on Parametric Optimization of WEDM of Die-Steel, Journal of The Institution of Engineers (India): Series C, Vol. 9, No. 1, pp. 49-56, 2014. DOI: 10.1007/s40032-014-0143-z.
  14. N. Senthilkumar, T. Tamizharasan, V. Anandakrishnan, Experimental Investigation and Performance Analysis of Cemented Carbide Inserts of different geometries using Taguchi based Grey Relational Analysis, Measurement, Vol. 58, pp. 520-536, 2014, DOI: 10.1016/j.measurement.2014.09.025.
  15. N. Senthilkumar, T. Tamizharasan, S. Gobikannan, Application of Response Surface Methodology and Firefly Algorithm for optimizing Multiple Responses in Turning AISI 1045 Steel, Arabian Journal for Science and Engineering,  Vol. 39, No. 11, 8015-8030, 2014. DOI 10.1007/s13369-014-1320-3.
  16. N. Senthilkumar, T. Tamizharasan, M. Anbarasan, Mechanical Characterization and Tribological Behaviour of Al-Gr-B4C Metal Matrix Composite prepared by Stir Casting Technique, Journal of Advanced Engineering Research, Vol. 1, No. 1, pp.48-59, 2014.
  17. N. Senthilkumar, T. Tamizharasan, V. Anandakrishnan, An Hybrid Taguchi-Grey Relational Technique and Cuckoo Search Algorithm for Multi-Criteria Optimization in Hard Turning of AISI D3 Steel, Journal of Advanced Engineering Research, Vol. 1, No. 1, pp.16-31, 2014.
  18. N. Senthilkumar, Azhagiri Pon, T. Tamizharasan, A Finite Element Simulation study on effects of variation in Machining and Geometrical parameters in Turning, Applied Mechanics and Materials, Vols. 592-594, pp. 3-7, 2014. DOI: 10.4028/www.scientific.net/AMM.592-594.3.
  19. V. Muthukumar, R. Venkatasamy , V. Mariselvam, A. Sureshbabu, N. Senthilkumar, A. Antony George Fernando, Comparative investigation on Mechanical properties of Natural fiber reinforced polyester composites, Applied Mechanics and Materials, Vols. 592-594, pp 92-96, 2014. DOI:10.4028/www.scientific.net/AMM.592-594.92.
  20. N. Senthilkumar, T. Tamizharasan, Experimental investigation of cutting zone temperature and flank wear correlation in turning AISI 1045 steel with different tool geometries, Indian Journal of Engineering & Materials Sciences, Vol. 21, No. 2, pp. 139-148, April 2014.
  21. N. Senthilkumar, T. Tamizharasan, Effect of Tool geometry in Turning AISI 1045 steel: Experimental Investigation and FEM analysis, Arabian Journal for Science and Engineering, Vol. 39, No. 6, pp. 4963-4975, June 2014. DOI: 10.1007/s13369-014-1054-2.
  22. N. Senthilkumar, T. Ganapathy and T. Tamizharasan, Optimization of Machining and Geometrical parameters in Turning process using Taguchi Method, Australian Journal of Mechanical Engineering, Vol. 12, No. 2, pp. 233-246, 2014, DOI:10.7158/M12-113.2014.12.2.
  23. T. Tamizharasan, N. Senthilkumar, Numerical Simulation of effects of Machining parameters and Tool Geometry using DEFORM-3D: Optimization and Experimental Validation, World Journal of Modelling and Simulation, Vol. 10, No. 1, pp. 49-59, 2014.
  24. N. Senthilkumar, T. Tamizharasan, V. Anandakrishnan, An ANN approach for predicting the cutting inserts performances of different geometries in hard turning, Advances in Production Engineering & Management, Vol. 8, No. 4, pp. 231-241, 2013. DOI: 10.14743/apem2013.4.170
  25. T. Tamizharasan, N. Senthilkumar, Optimization of Cutting insert geometry using DEFORM-3D: Numerical Simulation and Experimental Validation, International Journal of Simulation Modelling (ISSN: 1726-4529), Vol. 11, No. 2, pp. 65-76, 2012. DOI: 10.2507/IJSIMM11(2)1.200.
  26. N. Senthilkumar, K. Kalaichelvan, K. Elangovan, Mechanical Behaviour of Aluminum Particulate Epoxy Composite – Experimental Study and Numerical Simulation, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 7, No. 3, pp. 214-221, 2012.
  27. N. Senthilkumar, T. Tamizharasan, Impact of Interface Temperature over Flank Wear in Hard Turning using Carbide Inserts, Procedia Engineering (ISSN: 1877-7058) (Elsevier), Vol. 38, pp. 613-621, 2012. DOI:10.1016/j.proeng.2012.06.076.
  28. N. Senthilkumar, C.K. Dhinakarraj, B. Deepanraj, N. Manikandan Babu, A. Santhosh Kumar, Modification and Analysis of Compressor Inter-Cooler Fin in Turbocharger using FEM, Procedia Engineering (ISSN: 1877-7058) (Elsevier), Vol. 38, pp. 379-384, 2012. DOI:10.1016/j.proeng.2012.06.047.
  29. T. Tamizharasan, N. Senthilkumar, Influence of Machining parameters in Turning – Numerical simulation and Optimization, International Journal of Mechanical and Manufacturing Technology (ISSN: 2277-8446), Vol. 1, No. 1, pp. 21-26.
  30. N. Senthilkumar, M. Kannan, K. Velavan, C.K. Dhinakarraj, Experimental Investigation and Optimization of Centreless Grinding parameters using Grey Relational Analysis, International Journal of Mechanical and Manufacturing Technology (ISSN: 2277-8446) , Vol. 1, No. 1, pp. 32-41.
  31. N. Senthilkumar, C.K. Dhinakarraj, K. Velavan, Finite element analysis and optimization of machining parameters and cutting insert shape in machining AISI 1045 steel, International Journal of Business Review and Manufacturing Management (ISSN: 2231-5349), Vol. 1, No. 1, pp. 8-15, 2011.

NATIONAL JOURNALS

  1. N. Senthilkumar, S. Gopalakrishnan, V. Veeraseran, Application of Grey Relational Analysis for Multi-criteria Optimization of cutting parameters in Turning AISI 4340 Steel, Journal of Manufacturing Engineering, Vol. 9, No. 1, pp. 30-35, 2014.
  2. N. Senthilkumar, T. Tamizharasan, Effect of cutting tool holder parameters in turning – A finite element simulation analysis, Journal of Mechanical Sciences, Vol. 2, No. 1, pp. 40-48, 2012.
  3. T.  Tamizharasan, N. Senthilkumar, Optimization of machining parameters and nose radius in turning using Simulated Annealing, Journal of Mechanical Sciences, Vol. 2, No. 1, pp. 32-39, 2012.
  4. V.K. Jeysingh, V. Muthukumar, N. Senthilkumar, Analysis and Optimization of approach angle and surface roughness parameters in dry machining of AISI 1045 steel, Journal of Emerging Technology in Mechanical Science and Engineering, Vol. 4, special issue 1, pp. 46-52, 2013.
  5. N. Senthilkumar, C.K. Dhinakarraj, V. Muthukumar, S. Kathiresan, K.S. Sreenivasan, Multi-response Optimization of Cylindrical Grinding parameters using Taguchi’s Technique and Simulated Annealing, Journal of Engineering Today, Vol. 14, Issue 2, pp. 57-62, 2012.
  6. T. Tamizharasan, N. Senthilkumar, Analysis of Geometrical and Machining parameters in Turning AISI 1045 steel using DEFORM-2D, Journal of Manufacturing Technology Today, Vol. 10, issue 9, CMTI, 2011, pp. 3-11, 2011.
  7. N. Senthilkumar, T. Tamizharasan, Finite Element Analysis and Optimization of uncoated carbide cutting inserts of different tool geometries in machining AISI 1045 steel, Journal of Mechanical Sciences, Vol. 1, No.1, pp. 41-51. 2011

INTERNATIONAL CONFERENCES

  1. D. Vinoth Kumar, S. Pachaiyappan, M. Kannan, N. Senthilkumar, Experimental Investigation on Solar PV Cell coated by Electroless plating method, Proceedings of the International Conference on Science and Innovative Engineering, (ICSIE-2016), organized by Jawahar Engineering College, Chennai on 3rd April 2016, pp. 117.
  2. G. Hariharan, N. Shenbaga Vinayaga Moorthi, N. Senthilkumar, A Numerical Simulation Study on Drill Bit Point Angle and Helix Angle during Drilling AISI 1045 Steel, Proceedings of ICAME-2015 15th& 16th of October 2015, UCEV, Villupuram, Tamil Nadu, pp. 837-844.
  3. N. Senthilkumar, P. Gopinathan, B. Deepanraj, Parametric Optimization of Drilling Hybrid Metal Matrix Composite using Taguchi-Grey Relational Analysis (ISME-M-113), Proceedings of the 17th ISME Conference, October 3-4, 2015, IIT Delhi, New Delhi.
  4. M. Vimalesh, Srikanth Prabhu, K.S. Vijay Sekar, N. Senthilkumar, Finite element analysis of the drilling of Inconel 718 super alloy, ICCME, Kochi.
  5. N. Senthilkumar, T. Tamizharasan, S. Gobikannan, Influence of machining parameters on surface roughness in turning AISI 4340 steel – Experimental Investigation and Optimization, IEEE – International Conference on Advances in Engineering, Science and Management (ICAESM-2014), organized by E.G.S Pillay Engineering College, Nagapattinam on 2nd and 3rd May 2014.
  6.  N. Senthilkumar, R. Sathish, S. Jayaprakash, S. Sabari, S. Vishnu prathap, A hybrid Grey-Fuzzy technique for optimizing multiple-responses in centerless grinding, IEEE – International Conference on Advances in Engineering, Science and Management (ICAESM-2014), organized by E.G.S Pillay Engineering College, Nagapattinam on 2nd and 3rd May 2014.
  7. N. Senthilkumar, P. Gopinathan, V. Muthukumar, Accelerated Particle Swarm Algorithm to Optimize the Performance of Multilayered Coated Carbide Turning Inserts, Second International Conference on Advances in Industrial Engineering Applications (ICAIEA 2014), organized by Department of Industrial Engineering, Anna University, Chennai on 6th to 8th January 2014, pp. 82-92.
  8. V. Muthukumar, A. Sureshbabu, N. Senthilkumar, R. Venkatasamy, An Accelerated Particle Swarm Optimization Algorithm on parametric optimization of WEDM of Die-Steel, 28th Indian Engineering Congress, organized by The Institution of Engineers (India), 20-22 December 2013, Chennai, pp. 177.
  9. V. Muthukumar, N. Senthilkumar, Impact of Machining Parameters on the EDM Process Responses: A Taguchi Approach for Al-SiC MMC, 4th Nirma University International Conference on Engineering, Organized by Institute of Technology, Nirma University, Ahmedabad, 28-30 November 2013.
  10. N. Senthilkumar, T. Tamizharasan, S. Gobikannan, Green Machining of AISI 1045 steel: Influence of machining parameters on flank wear, International Conference on Green Technology in Engineering and Applied Sciences held at Adhiparasakthi Engineering College, Melmaruvathur on 29th and 30th March 2012. pp. 26.
  11. N. Senthilkumar, D.N. Sathyanarayanan, A. Satheesh, N. Santhosh, Performance Evaluation of carbide cutting inserts during green machining of AISI 1045 steel, International Conference on Green Technology in Engineering and Applied Sciences held at Adhiparasakthi Engineering College, Melmaruvathur on 29th and 30th March 2012. pp. 25.
  12. N. Senthilkumar, K. Pravinkumar, E.Jagan, P. Maruthachalam, Multi-criteria optimization of machining parameters in green turning using NSGA-II, International Conference on Green Technology in Engineering and Applied Sciences held at Adhiparasakthi Engineering College, Melmaruvathur on 29th and 30th March 2012. pp. 27.
  13. D. Muruganandam, Dr. Sushil Kumar Das, N. Senthilkumar, P. Rameshkumar, Analysis of Mechanical strength of dissimilar aluminum alloys AA7075 and AA2024 in Friction stirs welding using Taguchi’s Technique, International Conference on Green Technology in Engineering and Applied Sciences held at Adhiparasakthi Engineering College, Melmaruvathur on 29th and 30th March 2012. pp. 26.
  14. V. Muthukumar, V.K. Jeysingh, R. Venkatasamy, N. Senthilkumar, A. Sureshbabu, Effect of Approach Angle and Machining Parameters on Surface Roughness Parameters in Dry Machining of AISI 1045 Steel, International Conference on Design, Analysis, Manufacturing and Simulation held at Saveetha School of Engineering, Chennai on 21st and 22nd March 2013.
  15. N. Senthilkumar C.K. Dhinakarraj, S. Gopalakrishnan, V. Veeraseran, Flank Wear and Surface Roughness minimization in Turning using Taguchi-Grey Relational Analysis, International Conference on Recent Advances in Material Processing Technology (RAMPT’13) organized by National Engineering College, Kovilpatti on 7th – 9th January 2013, pp. 148-151.
  16. N. Senthilkumar, C.K. Dhinakarraj, B. Deepanraj, G.S. SankaraNarayanan, Multi-Objective Optimization and Empirical Modeling of Centerless Grinding Parameters, International Conference on Emerging Trends in Science, Engineering and Technology (INCOSET – 2012) held at J.J College of Engineering and Technology, Tiruchirappalli on 13th and 14th December 2012, pp. 285-295. DOI: 10.1007/978-81-322-1007-8_25. (Available at Springer Digital Library).
  17. N. Senthilkumar, K. Velavan, C.K. Dhinakarraj, U. Mohammed Iqbal, An Explosive Cladding Technique to weld dissimilar plates of Aluminium and Mild Steel, International conference on Recent Advances in mechanical engineering (INCRAME-2012) held at Dr. M.G.R Educational and research institute, Chennai on 19th and 20th April 2012, pp. 52.
  18. T. Tamizharasan, N. Senthilkumar, Analysis of Surface Roughness and Material Removal Rate in Turning using Taguchi’s Technique, IEEE – International Conference on Advances in Engineering, Science and Management (ICAESM-2012), organized by E.G.S Pillay Engineering College, Nagapattinam on 30th and 31st March 2012, pp. 231-236. (Available Online at IEEEXplore)
  19. B.Deepanraj, N. Senthilkumar, V. Sivaramakrishnan, A. Santhoshkumar, P. Lawrence, R. Valarmathi, Transesterified Palm Oil as an Alternate Fuel for Compression Ignition Engine, IEEE – International Conference on Advances in Engineering, Science and Management (ICAESM-2012), organized by E.G.S Pillay Engineering College, Nagapattinam on 30th and 31st March 2012, pp. 389-392. (Available Online at IEEEXplore)
  20. N. Senthilkumar, C.K. Dhinakarraj, K. Velavan, Performance improvement and error elimination of piston valve via statistical process control tools, International conference on Futuristic trends in Mechanical Engineering, organized by Thiruvalluvar college of Engineering and Technology, Vandavasi, 28th and 29th January 2012, pp. 17-21.

NATIONAL CONFERENCES

  1. S. Gopalakrishnan, P. Madhusudhanan, N. Senthilkumar, Finite element simulation and analysis of drilling process using DEFORM-3D, Third National Conference on Advancement and Recent Innovations in Mechanical Engineering (ARIME 2013), held at SRM Easwari Engineering College, Chennai - 89 on 5th April 2013.
  2. A. Thanikasalam, N. Senthilkumar, Automated Analysis of Inspection process for an Automobile component using SPC Tools, National Conference on Contemporary Approaches in Mechanical Engineering (NCCAME-2013), held at Karpaga Vinayaga College of Engineering and Technology on 28th February 2013, pp. 39-43.
  3. N. Senthilkumar, T. Jagadeesan, R. Prakash, R. Senthilkumar, P. Vijaybabu, A Novel Force Measurement System for Cylindrical Grinding, National conference on Emerging Trends in Design and Manufacturing (ETDM – 2012), held at Saveetha Engineering College, Chennai on 28th March 2012, pp. 42.
  4. V. Muthukumar, N. Senthilkumar, B. Ganesamoorthy, A comparative Machinability study on WEDM of different advanced materials, National Conference on Contemporary Approaches in Mechanical Engineering (NCCAME’12), organized by Karpaga Vinayaga College of Engineering and Technology, Mathuranthagam Tk, Kanchipuram Dt, 29th February 2012, pp. 190-194.
  5. N. Senthilkumar, C.K. Dhinakarraj, K. Velavan, Analysis of Surface Roughness and Roundness Error in Centreless Grinding – An Taguchi’s Approach, CSIR and DRDO sponsored National Conference on Advanced Materials and Processing Technology, organized by PRIST University, Thanjavur, 17th and 18th February 2012.
  6. N. Senthilkumar, S.R. Mohan, V. Ramabalan, M. Santhoshkumar, S.P. Krishnakumar, Finite element analysis and optimization of machining parameters in Turning using Deform-2D”, National conference on Recent Advances in Manufacturing and Materials (RAMM’11), held at Chenduran College of Engineering and Technology, Pudukottai, 8th and 9th of April 2011, pp. 140-146. BEST PAPER.
  7. C.K. Dhinakarraj, N. Senthilkumar, P. Mangayarkarasi, Combined Grey Relational Analysis and methods for optimization of process parameters in cylindrical grinding, National Conference organized by Sathyabama University, 9th and 10th August 2010, pp. 105.
  8. N. Senthilkumar, J. Sudha, K. Elangovan, K. Kalaichelvan, Experimental Study on Suitability of Aluminum filled Epoxy resin Composite for Mold Material, National Conference on “Recent Trends in Engineering Materials and Manufacturing Process” held at Sri SaiRam Engineering College, Chennai, 16th March 2007, pp. 3-9.
  9. N. Senthilkumar, C.K. Dhinakarraj, K. Kalaichelvan, Mathematical Modeling of Stress-Strain relationship of NiTi Shape Memory Alloy, National Conference on Recent Advances in Product Design, Materials Technology and Manufacturing System (RAPMATS’06) held at Madras Institute of Technology, MIT campus, Anna University, Chennai, 6th and 7th January 2006, pp. 149-154.

INTERNATIONAL / NATIONAL WORKSHOP ATTENDED 

  1. Attended a One week Short Term Course on “Nanomaterials: Characterization and Applications” at NITTR, Chandigarh from 10th November to 14th November 2014.
  2. Attended a Ten days TEQIP II Sponsored Faculty Development Programme on, “Mathematical Modeling, Analysis and Optimization of Mechanical System”, held at Anna University, BITS Campus, Tiruchirappalli from 19-12-2013 to 27-12-2013.
  3. Attended a Two weeks AICTE Sponsored Faculty Development Programme on, “Recent Research and Development in Manufacturing Process – II”, held at M.A.M College of Engineering, Tiruchirappalli from 11-11-2013 to 24-11-2013.
  4. Attended a Two weeks AICTE Sponsored Faculty Development Programme on, “Recent Research and Development in Manufacturing Process”, held at M.A.M College of Engineering, Tiruchirappalli from 29-04-2013 to 11-05-2013.
  5. Attended a Two days National level workshop on, “Advanced Engineering Optimization and Modeling using MATLAB & SCILAB”, held at Saveetha Engineering College, Chennai from 29-11-2012 to 30-11-2012.
  6. Attended a Two week Staff Development Programme on, “Computational Intelligence for Modeling and Optimization of Manufacturing System”, held at Bannari Amman Institute of Technology, Sathyamangalam from 06-06-2011 to 18-06-2011.
  7. Attended a One day National level workshop on, “Research Methodology”, held at Sri Venkateswara College of Engineering, Sriperumbudur on 30-03-2011.
  8. Attended a Two days’ workshop on, “Application of Intelligent Optimization Techniques using MATLAB – 7.0”, held at Bannari Amman Institute of Technology, Sathyamangalam from          07-01-2011 to 08-01-2011
  9. Attended a Two days CSIR Sponsored National Seminar on, “Intelligent Optimization Techniques for Manufacturing”, held at Kongu Engineering College, Erode from 26-11-2010 to 27-11-2010.
  10. Attended a One day National Workshop on “Advanced Measurement Techniques for Metal cutting Research”, held at Karunya University, Coimbatore on 05-02-2010
  11. Attended a Two day Workshop on “Micromachining”, held at National Institute of Technology, Tiruchirappalli from 18-12-2008 to 19-12-2008.

 

EVENTS ORGANIZED 

  1. Coordinator for a Two day workshop “Optimization Techniques for Engineering Applications” on 13th and 14th February 2015.
  2. Coordinator for a One day workshop “Recent Developments in Renewable Sources of Energy” on 23rd January 2015.
  3. Co-coordinator for a National level Conference “Recent Research in Mechanical Engineering” on 21st April 2012.