Bifen XTS

Bifen XTS is a liquid insecticide and termiticide that can be used for various purposes, such as protecting homes and commercial properties from termites and other pests like ants, spiders, and fleas. It is crucial to follow the instructions on the product label carefully to ensure safe and effective use.

Mixing Instructions

1. Gather the necessary equipment: You will need a clean spray tank, a measuring device, Bifen XTS, and water.
2. Calculate the amount of Bifen XTS: Refer to the product label for the recommended dilution ratio for your specific needs. The label provides a mixing chart that shows the amount of Bifen XTS needed for different finished dilution volumes.
3. Prepare the spray tank: Fill the tank 1/4 to 1/3 full with water. Start the pump to begin agitation and place the end of the treating tool in the tank to allow circulation through the hose.
4. Add Bifen XTS: Add the appropriate amount of Bifen XTS to the tank based on your calculations.
5. Add the remaining water: Fill the tank with the remaining amount of water needed for the desired finished dilution volume.
6. Agitate the mixture: Allow the pump to run and the mixture to recirculate through the hose for 2 to 3 minutes to ensure a consistent dilution.

Note: Bifen XTS can also be mixed into a full tank of water. If you choose this method, allow enough time for agitation and recirculation to ensure a consistent dilution.

Application Instructions

1. Identify the target area: Determine the areas where you need to apply the Bifen XTS. This may include the perimeter of your home, the foundation, the soil around the structure, or other areas where pests are present.
2. Prepare the application equipment: Use a sprayer that is appropriate for the size and type of area you are treating. Ensure the sprayer is clean and in good working condition.
3. Apply Bifen XTS: Apply the diluted Bifen XTS according to the product label instructions. Pay attention to the recommended application rate and any specific instructions for the target area.
4. Post-application: After application, allow the treated area to dry completely before allowing people or pets to access it. Store any leftover Bifen XTS in a safe place away from children and pets.

Remember: Always wear the appropriate personal protective equipment (PPE) when handling and applying Bifen XTS, as indicated on the product label. This may include gloves, eye protection, and a respirator.

Additional Tips:

• Read the entire product label before using Bifen XTS.
• Do not apply Bifen XTS in windy conditions to avoid drift.
• Do not apply Bifen XTS to areas where it may runoff into water sources.
• If you have any questions or concerns, consult with a pest control professional.

DIY Pest and Lawn - 386-774-2847

2417 Enterprise Rd. Orange City, FL 32763

WARRANTY AND CONDITIONS OF SALE Seller makes no warranty, expressed or implied, concerning the use and handling of this product other than indicated on the label. Buyer assumes all risk of use and handling of this material when such use and handling are contrary to label instructions