###############################################################################

## Instructions to fill this response file                                   ##

## To install and configure 'Grid Infrastructure for Cluster'                ##

##  - Fill out sections A,B,C,D,E,F and G                                    ##

##  - Fill out section G if OCR and voting disk should be placed on ASM      ##

##                                                                           ##

## To install and configure 'Grid Infrastructure for Standalone server'      ##

##  - Fill out sections A,B and G                                            ##

##                                                                           ##

## To install software for 'Grid Infrastructure'                             ##

##  - Fill out sections A,B and C                                            ##

##                                                                           ##

## To upgrade clusterware and/or Automatic storage management of earlier     ##

## releases                                                                  ##

##  - Fill out sections A,B,C,D and H                                        ##

###############################################################################

#------------------------------------------------------------------------------

# Do not change the following system generated value.

#------------------------------------------------------------------------------

oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_schema_v12.1.0

###############################################################################

#                          SECTION A - BASIC                                  #

###############################################################################

#-------------------------------------------------------------------------------

# Specify the hostname of the system as set during the install. It can be used

# to force the installation to use an alternative hostname rather than using the

# first hostname found on the system. (e.g., for systems with multiple hostnames

# and network interfaces)

#-------------------------------------------------------------------------------

ORACLE_HOSTNAME=

#-------------------------------------------------------------------------------

# Specify the location which holds the inventory files.

# This is an optional parameter if installing on  

# Windows based Operating System.

#-------------------------------------------------------------------------------

INVENTORY_LOCATION=/u01/app/oraInventory

#-------------------------------------------------------------------------------

# Specify the languages in which the components will be installed.            

#

# en   : English                  ja   : Japanese                  

# fr   : French                   ko   : Korean                    

# ar   : Arabic                   es   : Latin American Spanish    

# bn   : Bengali                  lv   : Latvian                  

# pt_BR: Brazilian Portuguese     lt   : Lithuanian                

# bg   : Bulgarian                ms   : Malay                    

# fr_CA: Canadian French          es_MX: Mexican Spanish          

# ca   : Catalan                  no   : Norwegian                

# hr   : Croatian                 pl   : Polish                    

# cs   : Czech                    pt   : Portuguese                

# da   : Danish                   ro   : Romanian                  

# nl   : Dutch                    ru   : Russian                  

# ar_EG: Egyptian                 zh_CN: Simplified Chinese        

# en_GB: English (Great Britain)  sk   : Slovak                    

# et   : Estonian                 sl   : Slovenian                

# fi   : Finnish                  es_ES: Spanish                  

# de   : German                   sv   : Swedish                  

# el   : Greek                    th   : Thai                      

# iw   : Hebrew                   zh_TW: Traditional Chinese      

# hu   : Hungarian                tr   : Turkish                  

# is   : Icelandic                uk   : Ukrainian                

# in   : Indonesian               vi   : Vietnamese                

# it   : Italian                                                  

#

# all_langs   : All languages

#

# Specify value as the following to select any of the languages.

# Example : SELECTED_LANGUAGES=en,fr,ja

#

# Specify value as the following to select all the languages.

# Example : SELECTED_LANGUAGES=all_langs  

#-------------------------------------------------------------------------------

SELECTED_LANGUAGES=en

#-------------------------------------------------------------------------------

# Specify the installation option.

# Allowed values: CRS_CONFIG or HA_CONFIG or UPGRADE or CRS_SWONLY or HA_SWONLY

#   - CRS_CONFIG : To configure Grid Infrastructure for cluster

#   - HA_CONFIG  : To configure Grid Infrastructure for stand alone server

#   - UPGRADE    : To upgrade clusterware software of earlier release

#   - CRS_SWONLY : To install clusterware files only (can be configured for cluster

#                  or stand alone server later)

#   - HA_SWONLY  : To install clusterware files only (can be configured for stand

#                  alone server later. This is only supported on Windows.)

#-------------------------------------------------------------------------------

oracle.install.option=UPGRADE

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle Base.

#-------------------------------------------------------------------------------

ORACLE_BASE=/u01/app/oracle

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle Home.

#-------------------------------------------------------------------------------

ORACLE_HOME=/u01/app/12.1.0/grid

################################################################################

#                                                                              #

#                              SECTION B - GROUPS                              #

#                                                                              #

#   The following three groups need to be assigned for all GI installations.   #

#   OSDBA and OSOPER can be the same or different.  OSASM must be different    #

#   than the other two.                                                        #

#   The value to be specified for OSDBA, OSOPER and OSASM group is only for    #

#   Unix based Operating System.                                               #

#                                                                              #

################################################################################

#-------------------------------------------------------------------------------

# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.

#-------------------------------------------------------------------------------

oracle.install.asm.OSDBA=dba

#-------------------------------------------------------------------------------

# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.

# The value to be specified for OSOPER group is optional.

#-------------------------------------------------------------------------------

oracle.install.asm.OSOPER=oinstall

#-------------------------------------------------------------------------------

# The OSASM_GROUP is the OS group which is to be granted OSASM privileges. This

# must be different than the previous two.

#-------------------------------------------------------------------------------

oracle.install.asm.OSASM=dba

################################################################################

#                                                                              #

#                           SECTION C - SCAN                                   #

#                                                                              #

################################################################################

#-------------------------------------------------------------------------------

# Specify a name for SCAN

#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.scanName=

#-------------------------------------------------------------------------------

# Specify a unused port number for SCAN service

#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.scanPort=

 

################################################################################

#                                                                              #

#                           SECTION D - CLUSTER & GNS                         #

#                                                                              #

################################################################################

#-------------------------------------------------------------------------------

# Specify the type of cluster you would like to configure

# Allowed values: FLEX and STANDARD

#-------------------------------------------------------------------------------

oracle.install.crs.config.ClusterType=STANDARD

#-------------------------------------------------------------------------------

# Specify a name for the Cluster you are creating.

#

# The maximum length allowed for clustername is 15 characters. The name can be

# any combination of lower and uppercase alphabets (A - Z), (0 - 9), hyphen(-)

# and underscore(_).

#-------------------------------------------------------------------------------

oracle.install.crs.config.clusterName=

#-------------------------------------------------------------------------------

# Specify 'true' if you would like to configure Grid Naming Service(GNS), else

# specify 'false'

#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.configureGNS=true

#-------------------------------------------------------------------------------

# Applicable only if you choose to configure GNS

# Specify 'true' if you would like to assign SCAN name VIP and Node VIPs by DHCP

# , else specify 'false'

#-------------------------------------------------------------------------------

oracle.install.crs.config.autoConfigureClusterNodeVIP=true

#-------------------------------------------------------------------------------

# Applicable only if you choose to configure GNS

# Specify the type of GNS configuration for cluster

# Allowed values are: CREATE_NEW_GNS and USE_SHARED_GNS

#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.gnsOption=CREATE_NEW_GNS

#-------------------------------------------------------------------------------

# Applicable only if SHARED_GNS is being configured for cluster

# Specify the path to the GNS client data file

#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.gnsClientDataFile=

#-------------------------------------------------------------------------------

# Applicable only if you choose to configure GNS for this cluster

# oracle.install.crs.config.gpnp.gnsOption=CREATE_NEW_GNS

# Specify the GNS subdomain and an unused virtual hostname for GNS service

#-------------------------------------------------------------------------------

oracle.install.crs.config.gpnp.gnsSubDomain=

oracle.install.crs.config.gpnp.gnsVIPAddress=

#-------------------------------------------------------------------------------

# Specify the list of nodes that have to be configured to be part of the cluster.

#

# The list should a comma-separated list of tuples.  Each tuple should be a

# colon-separated string that contains

# - 2 fields if configuring a Standard Cluster, or

# - 3 fields if configuring a Flex Cluster

#

# The fields should be ordered as follows:

# 1. The first field should be the public node name.

# 2. The second field should be the virtual host name

#    (Should be specified as AUTO if you have chosen 'auto configure for VIP'

#     i.e. autoConfigureClusterNodeVIP=true)

# 3. The third field indicates the role of node (HUB,LEAF). This has to

#    be provide only if Flex Cluster is being configured.

#

# Examples

# For configuring Standard Cluster: oracle.install.crs.config.clusterNodes=node1:node1-vip,node2:node2-vip

# For configuring Flex Cluster: oracle.install.crs.config.clusterNodes=node1:node1-vip:HUB,node2:node2-vip:LEAF

#

#

#-------------------------------------------------------------------------------

oracle.install.crs.config.clusterNodes=

#-------------------------------------------------------------------------------

# The value should be a comma separated strings where each string is as shown below

# InterfaceName:SubnetMask:InterfaceType

# where InterfaceType can be either "1", "2", "3", "4", or "5"

# InterfaceType stand for the following values

#   - 1 : PUBLIC

#   - 2 : PRIVATE

#   - 3 : DO NOT USE

#   - 4 : ASM

#   - 5 : ASM & PRIVATE

#

# For example: eth0:140.87.24.0:1,eth1:10.2.1.0:2,eth2:140.87.52.0:3

#

#-------------------------------------------------------------------------------

oracle.install.crs.config.networkInterfaceList=

#-------------------------------------------------------------------------------

# Specify 'true' if you would like to configure Management Database Option, else

# specify 'false'

#-------------------------------------------------------------------------------

oracle.install.crs.managementdb.configure=true

################################################################################

#                                                                              #

#                              SECTION E - STORAGE                             #

#                                                                              #

################################################################################

#-------------------------------------------------------------------------------

# Specify the type of storage to use for Oracle Cluster Registry(OCR) and Voting

# Disks files

#   - LOCAL_ASM_STORAGE

#   - FLEX_ASM_STORAGE

#   - FILE_SYSTEM_STORAGE

# If configuring a Flex Cluster, FLEX_ASM_STORAGE is the only allowed value

#-------------------------------------------------------------------------------

oracle.install.crs.config.storageOption=

#-------------------------------------------------------------------------------

# These properties are applicable only if FILE_SYSTEM_STORAGE is chosen for

# storing OCR and voting disk

# Specify the location(s) and redundancy for OCR and voting disks

# Multiple locations can be specified, separated by commas.

# In case of windows, mention the drive location that is specified to be

# formatted for DATA in the above property.

# Redundancy can be one of these:

#     EXTERNAL - one(1) location should be specified for OCR and voting disk

#     NORMAL - three(3) locations should be specified for OCR and voting disk

# Example:

#     For Unix based Operating System:

#     oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=/oradbocfs/storage/vdsk1,/oradbocfs/storage/vdsk2,/oradbocfs/storage/vdsk3

#     oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=/oradbocfs/storage/ocr1,/oradbocfs/storage/ocr2,/oradbocfs/storage/ocr3

#     For Windows based Operating System OCR/VDSK on shared storage is not supported.

#-------------------------------------------------------------------------------

oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=

oracle.install.crs.config.sharedFileSystemStorage.votingDiskRedundancy=NORMAL

oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=

oracle.install.crs.config.sharedFileSystemStorage.ocrRedundancy=NORMAL

                       

################################################################################

#                                                                              #

#                               SECTION F - IPMI                               #

#                                                                              #

################################################################################

#-------------------------------------------------------------------------------

# Specify 'true' if you would like to configure Intelligent Power Management interface

# (IPMI), else specify 'false'

#-------------------------------------------------------------------------------

oracle.install.crs.config.useIPMI=false

#-------------------------------------------------------------------------------

# Applicable only if you choose to configure IPMI

# i.e. oracle.install.crs.config.useIPMI=true

# Specify the username and password for using IPMI service

#-------------------------------------------------------------------------------

oracle.install.crs.config.ipmi.bmcUsername=

oracle.install.crs.config.ipmi.bmcPassword=

################################################################################

#                                                                              #

#                                SECTION G - ASM                               #

#                                                                              #

################################################################################

#-------------------------------------------------------------------------------

# Specify a password for SYSASM user of the ASM instance

#-------------------------------------------------------------------------------

oracle.install.asm.SYSASMPassword=

#-------------------------------------------------------------------------------

# The ASM DiskGroup

#

# Example: oracle.install.asm.diskGroup.name=data

#

#-------------------------------------------------------------------------------

oracle.install.asm.diskGroup.name=

#-------------------------------------------------------------------------------

# Redundancy level to be used by ASM.

# It can be one of the following  

#   - NORMAL

#   - HIGH

#   - EXTERNAL

# Example: oracle.install.asm.diskGroup.redundancy=NORMAL

#

#-------------------------------------------------------------------------------

oracle.install.asm.diskGroup.redundancy=

#-------------------------------------------------------------------------------

# Allocation unit size to be used by ASM.

# It can be one of the following values

#   - 1

#   - 2

#   - 4

#   - 8

#   - 16

#   - 32

#   - 64

# Example: oracle.install.asm.diskGroup.AUSize=4

# size unit is MB

#

#-------------------------------------------------------------------------------

oracle.install.asm.diskGroup.AUSize=1

#-------------------------------------------------------------------------------

# List of disks to create a ASM DiskGroup

#

# Example:

#     For Unix based Operating System:

#     oracle.install.asm.diskGroup.disks=/oracle/asm/disk1,/oracle/asm/disk2

#     For Windows based Operating System:

#     oracle.install.asm.diskGroup.disks=\\.\ORCLDISKDATA0,\\.\ORCLDISKDATA1

#

#-------------------------------------------------------------------------------

oracle.install.asm.diskGroup.disks=

#-------------------------------------------------------------------------------

# The disk discovery string to be used to discover the disks used create a ASM DiskGroup

#

# Example:

#     For Unix based Operating System:

#     oracle.install.asm.diskGroup.diskDiscoveryString=/oracle/asm/*

#     For Windows based Operating System:

#     oracle.install.asm.diskGroup.diskDiscoveryString=\\.\ORCLDISK*

#

#-------------------------------------------------------------------------------

oracle.install.asm.diskGroup.diskDiscoveryString=

#-------------------------------------------------------------------------------

# oracle.install.asm.monitorPassword=password

#-------------------------------------------------------------------------------

oracle.install.asm.monitorPassword=

################################################################################

#                                                                              #

#                             SECTION H - UPGRADE                              #

#                                                                              #

################################################################################

#-------------------------------------------------------------------------------

# Specify whether to ignore down nodes during upgrade operation.

# Value should be 'true' to ignore down nodes otherwise specify 'false'

#-------------------------------------------------------------------------------

oracle.install.crs.config.ignoreDownNodes=false

#------------------------------------------------------------------------------

# Specify the auto-updates option. It can be one of the following:

#   - MYORACLESUPPORT_DOWNLOAD

#   - OFFLINE_UPDATES

#   - SKIP_UPDATES

#------------------------------------------------------------------------------

oracle.installer.autoupdates.option=SKIP_UPDATES

#------------------------------------------------------------------------------

# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where

# the updates are to be downloaded.

# In case OFFLINE_UPDATES option is chosen, specify the location where the updates

# are present.

#------------------------------------------------------------------------------

oracle.installer.autoupdates.downloadUpdatesLoc=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username which has the patches download privileges  

# to be used for software updates.

#  Example   : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username password which has the patches download privileges  

# to be used for software updates.

#

# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

#------------------------------------------------------------------------------

# Specify the Proxy server name. Length should be greater than zero.

#

# Example    : PROXY_HOST=proxy.domain.com

#------------------------------------------------------------------------------

PROXY_HOST=

#------------------------------------------------------------------------------

# Specify the proxy port number. Should be Numeric and atleast 2 chars.

#

# Example    : PROXY_PORT=25

#------------------------------------------------------------------------------

PROXY_PORT=0

#------------------------------------------------------------------------------

# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD

# blank if your proxy server requires no authentication.

#

# Example    : PROXY_USER=username

#------------------------------------------------------------------------------

PROXY_USER=

#------------------------------------------------------------------------------

# Specify the proxy password. Leave PROXY_USER and PROXY_PWD  

# blank if your proxy server requires no authentication.

#

# Example    : PROXY_PWD=password

#------------------------------------------------------------------------------

PROXY_PWD=

#------------------------------------------------------------------------------

# Specify the proxy realm.

#

# Example    : PROXY_REALM=metalink

#------------------------------------------------------------------------------

PROXY_REALM=