2018-19 TAG Grade 3 TEKS Correlation by Unit.xlsx
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

ABCDEFGHIJKLMNOPQRSTU
1
3rd Grade Focus TEKS123456789Notes
2
(2) Number and operations. The student applies mathematical process standards to represent and compare whole numbers and understand relationships related to place value. The student is expected to:s 2.2A 2.2 EF
3
(A) compose and decompose numbers up to 100,000 as a sum of so many ten thousands, so many thousands, so many hundreds, so many tens, and so many ones using objects, pictorial models, and numbers, including expanded notation as appropriate; - Readiness RC1xs
4
(B) describe the mathematical relationships found in the base-10 place value system through the hundred thousands place; - Supporting RC1xs
5
(C) represent a number on a number line as being between two consecutive multiples of 10; 100; 1,000; or 10,000 and use words to describe relative size of numbers in order to round whole numbers; and - Supporting RC1xx/s
6
(D) compare and order whole numbers up to 100,000 and represent comparisons using the symbols >, <, or =. - Readiness RC1xs
7
(3) Number and operations. The student applies mathematical process standards to represent and explain fractional units. The student is expected to:s 2.4 A-D 2.7 BC
8
(A) represent fractions greater than zero and less than or equal to one with denominators of 2, 3, 4, 6, and 8 using concrete objects and pictorial models, including strip diagrams and number lines; - Supporting RC1xs
9
(B) determine the corresponding fraction greater than zero and less than or equal to one with denominators of 2, 3, 4, 6, and 8 given a specified point on a number line; Supporting RC1xs
10
(C) explain that the unit fraction 1/b represents the quantity formed by one part of a whole that has been partitioned into b equal parts where b is a non-zero whole number; - Supporting RC1xs
11
(D) compose and decompose a fraction a/b with a numerator greater than zero and less than or equal to b as a sum of parts 1/b; - Supporting RC1xs
12
(E) solve problems involving partitioning an object or a set of objects among two or more recipients using pictorial representations of fractions with denominators of 2, 3, 4, 6, and 8; - Supporting RC1xs
13
(F) represent equivalent fractions with denominators of 2, 3, 4, 6, and 8 using a variety of objects and pictorial models, including number lines; - Readiness RC1xs
14
(G) explain that two fractions are equivalent if and only if they are both represented by the same point on the number line or represent the same portion of a same size whole for an area model; and - Supporting RC1xs
15
(H) compare two fractions having the same numerator or denominator in problems by reasoning about their sizes and justifying the conclusion using symbols, words, objects, and pictorial models. - Readiness RC1xs
16
(4) Number and operations. The student applies mathematical process standards to develop and use strategies and methods for whole number computations in order to solve problems with efficiency and accuracy. The student is expected to:
17
(A) solve with fluency one-step and two-step problems involving addition and subtraction within 1,000 using strategies based on place value, properties of operations, and the relationship between addition and subtraction; - Readiness RC2xsx
18
(B) round to the nearest 10 or 100 or use compatible numbers to estimate solutions to addition and subtraction problems; - Supporting RC2xs
19
(C) determine the value of a collection of coins and bills; - Supporting RC4xsx
20
(D) determine the total number of objects when equally-sized groups of objects are combined or arranged in arrays up to 10 by 10; - Supporting RC2xs
21
(E) represent multiplication facts by using a variety of approaches such as repeated addition, equal-sized groups, arrays, area models, equal jumps on a number line, and skip counting; - Supporting RC2xs
22
(F) recall facts to multiply up to 10 by 10 with automaticity and recall the corresponding division facts;- Supporting RC2ccx/cccccc
23
(G) use strategies and algorithms, including the standard algorithm, to multiply a two-digit number by a one-digit number. Strategies may include mental math, partial products, and the commutative, associative, and distributive properties; - Supporting RC2xc
24
(H) determine the number of objects in each group when a set of objects is partitioned into equal shares or a set of objects is shared equally; - Supporting RC2xs
25
(I) determine if a number is even or odd using divisibility rules; - Supporting RC1xs
26
(J) determine a quotient using the relationship between multiplication and division; and - Supporting RC2xs
27
(K) solve one-step and two-step problems involving multiplication and division within 100 using strategies based on objects; pictorial models, including arrays, area models, and equal groups; properties of operations; or recall of facts. - Readiness RC2xsx
28
(5) Algebraic reasoning. The student applies mathematical process standards to analyze and create patterns and relationships. The student is expected to:
29
(A) represent one- and two-step problems involving addition and subtraction of whole numbers to 1,000 using pictorial models, number lines, and equations; - Readiness RC2xs
30
(B) represent and solve one- and two-step multiplication and division problems within 100 using arrays, strip diagrams, and equations; - Readiness RC2xx
31
(C) describe a multiplication expression as a comparison such as 3 x 24 represents 3 times as much as 24; - Supporting RC2xs
32
(D) determine the unknown whole number in a multiplication or division equation relating three whole numbers when the unknown is either a missing factor or product; and - Supporting RC2xx
33
(E) represent real-world relationships using number pairs in a table and verbal descriptions. - Readiness RC2xs
34
(6) Geometry and measurement. The student applies mathematical process standards to analyze attributes of two-dimensional geometric figures to develop generalizations about their properties. The student is expected to:
35
(A) classify and sort two- and three-dimensional figures, including cones, cylinders, spheres, triangular and rectangular prisms, and cubes, based on attributes using formal geometric language; - Readiness RC3xs
36
(B) use attributes to recognize rhombuses, parallelograms, trapezoids, rectangles, and squares as examples of quadrilaterals and draw examples of quadrilaterals that do not belong to any of these subcategories; - Supporting RC3xs
37
(C) determine the area of rectangles with whole number side lengths in problems using multiplication related to the number of rows times the number of unit squares in each row; - Readiness RC3x
38
(D) decompose composite figures formed by rectangles into non-overlapping rectangles to determine the area of the original figure using the additive property of area; and - Supporting RC3xs
39
(E) decompose two congruent two-dimensional figures into parts with equal areas and express the area of each part as a unit fraction of the whole and recognize that equal shares of identical wholes need not have the same shape. - Supporting RC3xx/s
40
(7) Geometry and measurement. The student applies mathematical process standards to select appropriate units, strategies, and tools to solve problems involving customary and metric measurement. The student is expected to:2.9D
41
(A) represent fractions of halves, fourths, and eighths as distances from zero on a number line; - Supporting RC1xx/s
42
(B) determine the perimeter of a polygon or a missing length when given perimeter and remaining side lengths in problems; - Readiness RC3xs
43
(C) determine the solutions to problems involving addition and subtraction of time intervals in minutes using pictorial models or tools such as a 15-minute event plus a 30-minute event equals 45 minutes; - Supporting RC3xs
44
(D) determine when it is appropriate to use measurements of liquid volume (capacity) or weight; and - Supporting RC3xs
45
(E) determine liquid volume (capacity) or weight using appropriate units and tools. - Supporting RC3xs
46
(8) Data analysis. The student applies mathematical process standards to solve problems by collecting, organizing, displaying, and interpreting data. The student is expected to:
47
(A) summarize a data set with multiple categories using a frequency table, dot plot, pictograph, or bar graph with scaled intervals; and - Readiness RC4xs
48
(B) solve one- and two-step problems using categorical data represented with a frequency table, dot plot, pictograph, or bar graph with scaled intervals. - Supporting RC4xs
49
(9) Personal financial literacy. The student applies mathematical process standards to manage one's financial resources effectively for lifetime financial security. The student is expected to:
50
(A) explain the connection between human capital/labor and income; - Supporting RC4x
51
(B) describe the relationship between the availability or scarcity of resources and how that impacts cost; - Supporting RC4x
52
(C) identify the costs and benefits of planned and unplanned spending decisions; - Not Testedx
53
(D) explain that credit is used when wants or needs exceed the ability to pay and that it is the borrower's responsibility to pay it back to the lender, usually with interest; - Supporting RC4x
54
(E) list reasons to save and explain the benefit of a savings plan, including for college; and - Supporting RC4x
55
(F) identify decisions involving income, spending, saving, credit, and charitable giving. - Not Testedx
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100 Loading...