My development chart

revision 20070522

Dilutions for Jobo 1520 development tank (485-500ml)

Kodak HC-110, dilution B (1+31): 15.5+480ml (enough for 4 rolls)
Kodak HC-110, dilution H (1+63): 8+500ml (enough for 2 rolls)
Jobo 1510 tank, HC-110 dilution B (1+31): 8+248ml
Rodinal 1+40: 12+480ml
Fomadon LQR 1+10: 45+450ml
Foma Citro stopper (1+19): 50+950ml (works until it turns from orange to blue, ~15 rolls)
Ilford Rapid Fixer(1+4): 200+800ml (works for 20+ rolls)
Agfa Agepon wetting agent (1+200): 5+1000ml (works for 20+ rolls)

Development times

Ilford HP5 Plus (120, 135)
20°C:

ISO 400: 10 min in HC-110 1+63
ISO 400: 5 min in HC-110 1+31
ISO 400: 13 min in D-76 1+1
pushed to ISO 800: 15-18 min in HC-110 1+63
pushed to ISO 800: 16.5 min in D-76 1+1
pushed to ISO 1600: 11 min in HC-110 1+31

25°C:

pushed to ISO 800: 12 min in HC-110 1+63
pushed to ISO 1600: 14-15 min in HC-110 1+63

Ilford Delta 100 (120)
20°C:

12 min in HC-110 1+63

22°C:

10 min in HC-110 1+63

Ilford Delta 3200 (120)
20°C:

normal ISO 1600: 18 min in HC-110 1+63, results not very exciting

Fuji Neopan 400 (120)
20°C:

normal ISO 400: 10.5 min in HC-110 1+63
pushed to ISO 800: 7.25 min in HC-110 1+31

ORWO NP20 (120, exp. 1992), ISO 80
Pre-soak 20 min in 23°C, then flush twice
20°C:

18 min in HC-110 1+63
9 min in Rodinal 1+40
6 min in Fomadon LQR 1+10

25°C:

12 min in HC-110 1+63

KODAK TRI-X Pan / TX (120)
24°C:

10 min in HC-110 1+63

Ilford FP4 Plus (120)
25°C:

12 min in HC-110 1+63

After development

Soak quickly in Foma Citro stopper
Fix in Ilford Rapid Fixer for 5 min
Wash 10 min in running water at 20-22°C
Run hot shower and make the air wet
Take out the spiral, pour gently the wetting agent, put gently spiral in, rotate for a minute, gently hang out for drying
Slightly open the bathroom door, let dry air in, after 10 minutes open the door wide, and wait till it's completely dry
Cut film and pack for storage

Links

HC-110 unofficial resource page